A. bevel gear
B. universal joint
C. Hooke’s joint
D. Knuckle joint
E. Oldham’s coupling
Related Mcqs:
- T Jie horse power transmitted by a belt is dependent upon _________________?
A. tension on tight side of belt
B. tension on slack side of belt
C. radius of pulley
D. speed of pulley
E. all of the above - Davis steering gear consists of__________________?
A. sliding pairs
B. turning pairs
C. rolling pairs
D. higher pairs
E. lower pairs - Automobile steering gear is an example of____________________?
A. higher pair
B. sliding pair
C. turning pair
D. rotary pair
E. lower pair - Ackermann steering gear consists of_______________?
A. sliding pairs
B. turning pairs
C. rolling pairs
D. higher pairs
E. lower pairs - To obviate axial thrust, following gear drive is used_____________________?
A. double helical gears having opposite teeth
B. double helical gears having identical teeth
C. single helical gear in which one of the teeth of helix angle a is more
D. mutter gears
E. none of the above - The Ackermann steering mechanism is preferred to the Davis type in automobiles because____________________?
A. the former is mathematically accurate
B. the former is having turning pair
C. the former is most economical
D. the former is most rigid
E. none of thfr above - A completely constrained motion can be transmitted with __________________?
A. 1 link with pin joints
B. 2 links with pin joints
C. 3 links with pin joints
D. 4 links with pin joints
E. all of the above - Cross head and guides form a _________________?
A. lower pair
B. higher pair
C. turning pair
D. rolling pair
E. sliding pair - In S.H.M., the velocity vector w.r.t. displacement vector _________________?
A. leads by 90°
B. lags by 90°
C. leads by 180°
D. are in phase
E. could be anywhere. - In S.H.M., acceleration is proportional to _________________?
A. velocity
B. displacement
C. rate of change of velocity
D. all of the above
E. none of the above
