A. centrifugal
B. axial
C. miniature sealed unit
D. piston type reciprocating
E. none of the above
Related Mcqs:
- Domestic refrigerator working on vapour compression cycle uses the following type of expansion device____________________?
A. electrically operated throttling valve
B. manually operated valve
C. thermostatic valve
D. capillary tube
E. expansion valve. - In a flooded evaporator refrigerator, an accumulator at suction of compressor is used to___________________?
A. collect liquid refrigerant and prevent it from going to compressor
B. detect liquid in vapour
C. superheat the vapour
D. collect vapours
E. increase refrigeration effect - Rating of a domestic refrigerator is of the order of__________________?
A. 0.1 ton
B. 5 tons
C. 10 tons
D. 40 tons
E. 100 tons - The bank of tubes at the back of domestic refrigerator are _________________?
A. condenser tubes
B. evaporator tubes
C. refrigerant cooling tubes
D. capillary tubes
E. throttling device - The vapor compression refrigerator employs the following cycle_________________?
A. Rankine
B. Carnot
C. Reversed Rankine
D. Brayton
E. Reversed Carnot - The refrigerant for a refrigerator should have ___________________?
A. high sensible heat
B. high total heat
C. high latent heat
D. low latent heat
E. low sensible heat - For better COP of refrigerator, the pressure range corresponding to temperature in evaporator and condenser must be____________________?
A. small
B. high
C. euqal
D. anything
E. under some conditions small and under some conditions high - In refrigerator, liquid receiver is required between condenser and flow controlling device, if quantity of refrigerant for system is_____________________?
A. less than 2 kg
B. more than or equal to 3.65 kg
C. more than 10 kg
D. there is no such consideration
E. pone of the above - Condensing temperature in a refrigerator is the temperature_________________?
A. of cooling medium
B. of freezing zone
C. of evaporator
D. at which refrigerant gas becomes liquid
E. condensing temperature of ice - Formation of frost on evaporator in refrigerator ________________?
A. results in loss of heat due to poor heat transfer
B. increases heat transfer rate
C. is immaterial
D. can be avoided by proper design
E. decreases compressor power