A. increases with increase in pressure
B. decreases with increase in pressure
C. more or less remains constant with in-crease in pressure
D. unpredictable
E. none of the above
Related Mcqs:
- For starting an axial flow pump, its delivery valve should be____________________?
A. closed
B. open
C. depends on starting condition and flow desired
D. could be either open or closed
E. partly open and partly closed - Axial flow pump is started with its delivery valve________________?
A. kept fully closed
B. kept fully open
C. irrespective of any position
D. kept 50% open
E. none of the above - In a centrifugal pump casing, the flow of water leaving the_______________?
A. radial
B. radial
C. centrifugal
D. rectilinear
E. vortex - If a pump is handling water and is discharging a certain flow Q at a constant total dynamic head requiring a definite B.H.P., the same pump when handling a liquid of specific gravity 0.75 and viscosity nearly same as of water would discharge_____________________?
A. same quantity of liquid
B. 0.75 Q
C. Q/0.75
D. 1.5 Q
E. none of the above - In axial flow fans and turbines, fluid enters and leaves as follows________________?
A. radially, axially
B. axially, radially
C. axially, axially
D. radially, radially
E. combination of axial and radial - In a centrifugal pump casing, the flow of water leaving the impeller, is___________________?
A. rectilinear flow
B. radial flow
C. free vortex motion
D. forced vortex
E. none of the above - Reciprocating pumps are no more to be seen in industrial applications (in comparison to centrifugal pumps) because of____________________?
A. high initial and maintenance cost
B. lower discharge
C. lower speed of operation
D. necessity of air vessel
E. all of the above - Reaction turbines are used for____________________?
A. low head
B. high head
C. high head and low discharge
D. high head and high discharge
E. low head and high discharge - According to fan laws, at constant pressure, the speed capacity and power vary_________________?
A. directly as the air or gas density
B. inversely as square root of density
C. inversely as density
D. as square of density
E. as square root of density - The hydraulic turbines are also known as : ___________?
A. steam turbines
B. water turbines
C. combustion turbines
D. Gas turbinesSubmitted by: Faheem Zaman Dhaunroo
