A. one dimensional flow
B. uniform flow
C. steady flow
D. turbulent flow
E. streamline flow
Related Mcqs:
- When the flow parameters at any given instant remain same at every point, then flow is said to be____________________?
A. quasi static
B. steady state
C. laminar
D. uniform
E. static. - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow - Ratio of inertia force to elastic force is known as _____________________?
A. Mach number
B. Froude number
C. Reynold’s number
D. Weber’s number
E. none of the above - What is the change in cost per unit variable change called ?
A. Variable cost
B. Incremental cost
C. Fixed cost
D. Supplemental cost - The ratio of maximum sewage flow to average sewage flow for mains up to 1 m in diameter, is___________________?
A. 1.5
B. 2.0
C. 3.0
D. 4.0 - For trunk sewers more than 1.25 m in diameter, the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed________________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0 - The ratio of maximum sewage flow to average sewage flow for trunk mains having diameters more than 1.25 m, is____________________?
A. 1.5
B. 2.0
C. 3.0
D. 4.0 - For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed__________________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0 - The ratio of minimum hourly flow to the average flow of sewage is_________________?
A. 1/4
B. 1/3
C. 1/2
D. 3/4 - You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at___________________?
A. Full depth
B. Half full
C. Two third full
D. Three fourth full
