A. 25 to 50 m
B. 50 m to 100 m
C. 100 m to 150 m
D. 150 m to 300 m
Related Mcqs:
- For laying a sewer line in a trench of 2 m width, an offset line is marked on the ground parallel to the given centre line at a distance of___________________?
A. 100 cm
B. 120 cm
C. 140 cm
D. 160 cm - The maximum depth of sedimentation tanks, is kept__________________?
A. 3 m
B. 3.5 m
C. 4 m
D. 4.5 m - Sewer ventilating columns are generally placed at_______________?
A. Distances 150 m to 300 m
B. Upper ends of branch sewers
C. Every change in the size of sewers
D. All the above - If the flame of a miner’s safety lamp in the upper layers of the sewer forms an explosive, the sewer certainly contains_______________?
A. Hydrogen sulphide
B. Carbon dioxide
C. Methane
D. Oxygen - If the discharge of a sewer running half is 628 1.p.s., i = 0.001, and n = 0.010, the diameter of the sewer, is__________________?
A. 1.39 m
B. 1.49 m
C. 1.59 m
D. 1.69 m - The spacing of man holes along a straight portion of a sewer is 300 m, the diameter of the sewer may be__________________?
A. 0.9 cm
B. 1.2 m
C. 1.5 m
D. > 1.5 m - The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is________________________?
A. 20 cm
B. 25 cm
C. 40 cm
D. 50 cm - The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is______________?
A. 0.68 m
B. 0.88 m
C. 1.36 m
D. 1.76 m - You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at___________________?
A. Full depth
B. Half full
C. Two third full
D. Three fourth full - weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is________________________?
A. w r S S
B. w r1/2
C. w r S
D. w r2/3
Advertisement