A. d = 0.2 B
B. d = 0.5 B
C. B = 0.2 d
D. B = 0.5 d
Related Mcqs:
- The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is______________?
A. 0.68 m
B. 0.88 m
C. 1.36 m
D. 1.76 m - The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is____________________?
A. 100 cm
B. 110 cm
C. 120 cm
D. 150 cm - If the peak discharge of a storm water drain (S.W. Drain) is expected to exceed 150 cumecs, the free board to be provided, is_________________?
A. 100 cm
B. 90 cm
C. 80 cm
D. 50 cm - The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is_____________________?
A. 204 cu.m
B. 208 cu.m
C. 212 cu.m
D. 216 cu.m - In a sedimentation tank (length L, width B, depth D) the settling velocity of a particle for a discharge Q, is____________________?
A. Q/(B × D)
B. Q/(L × D)
C. Q/L
D. Q/(B × L) - In circular sewers if depth of flow is 0.2 times the full depth, the nominal gradient,______________?
A. Is only provided
B. Is doubled
C. Is trebled
D. Is not enough - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow - In trickling filter, B.O.D. is reduced to___________________?
A. 30 to 40%
B. 40 to 60%
C. 60 to 80%
D. 80 to 90% - The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is __________________?
A. 5 m
B. 5.5 m
C. 6.5 m
D. 7 m - For laying a sewer line in a trench of 2 m width, an offset line is marked on the ground parallel to the given centre line at a distance of___________________?
A. 100 cm
B. 120 cm
C. 140 cm
D. 160 cm
