A. 1.5 d
B. 2.0 d
C. 2.5 d
D. 3.0 d
where d is diameter of rivets
Related Mcqs:
- Efficiency of a riveted joint, having the minimum pitch as per IS : 800, is_________________?
A. 40%
B. 50%
C. 60%
D. 70% - Steel tanks are mainly designed for_______________________?
A. weight of tank
B. wind pressure
C. water pressure
D. earthquake forces - Maximum pitch of rivets, used in steel stacks, is limited to_______________?
A. 6t
B. 101
C. 121
D. 161
where t is thickness of thinner plate being connected - Which of the following types of riveted joint is free from bending stresses ?
A. lap joint
B. butt joint with single cover plate
C. butt joint with double cover plates
D. none of the above - By providing sufficient edge distance, which of the following failures of riveted joint can be avoided ?
A. tension failure of the plate
B. shear failure of the rivet
C. shear failure of the plate
D. crushing failure of the rivet - In moment resistant connections, the moment resistance of riveted connection depends upon________________?
A. shear in rivets
B. compression in rivets
C. tension in rivets
D. strength of rivets in bearing - The minimum thickness of a steel plate, which is directly exposed to weather and is not accessible for cleaning and repainting, should be___________________?
A. 4.5 mm
B. 6 mm
C. 8 mm
D. 10 mm - The minimum thickness of plates in a steel stack should be___________________?
A. 4 mm
B. 5 mm
C. 6 mm
D. 8 mm - The allowable tensile stress in structural mild steel plates for steel tank is assumed as________________?
A. 95.0 MPa on net area
B. 105.5 MPa on net area
C. 105.5 MPa on gross area
D. 150.0 MPa on gross area - The maximum slenderness ratio of a steel column, the design of which is governed by wind or seismic forces is________________?
A. 150
B. 180
C. 250
D. 350
