S: 1 and length is______________?

Related Mcqs:

1. The total length of a cranked bar through a distance D. at 45° in case of a beam of effective length L, is_________________?

   A. L + 0.42 d
   B. L + (2 × 0.42 d)
   C. L – (0.42 d)
   D. L – (2 × 0.4 d)

2. If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by_______________?

   A. Mid-section formula
   B. Trapezoidal formula
   C. Prismoidal formula
   D. All the above

3. In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and_________________?

   A. Breadth of the wall
   B. Half breadth of wall on each side
   C. One fourth breadth of wall on each side
   D. None of these

4. The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is_______________?

   A. Rs. 400
   B. Rs. 425
   C. Rs. 450
   D. Rs. 500

5. 88 is 1400 kg/cm2 and bond stress is 6 kg/cm2, the If tensile stress of a steel rod of diameter required bond length of the rod is____________________?

   A. 30 D
   B. 39 D
   C. 50 D
   D. 59 D

6. The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient of the embankment is 1 in 150, the quantity of the earthwork calculated by Prismoidal formula, is____________________?

   A. 3250 m3
   B. 3225 m3
   C. 3275 m3
   D. 3300 m3

7. According to Indian Standards Institute, the actual size of modular bricks is_______________?

   A. 23 cm × 11.5 cm × 7.5 cm
   B. 25 cm × 13 cm × 7.5 cm
   C. 19 cm × 9 cm × 9 cmD. 20 cm × 10 cm × 10 cm

8. Pick up the incorrect statement from the following ?

   A. No deduction is made for the volume occupied by reinforcement
   B. No deduction is made for the openings upto 0.1 sq.m
   C. No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in cross-section
   D. None of these

9. According to ISI method of measurement, the order of the sequence is_________________?

   A. Length, breadth, height
   B. Breadth, length, height
   C. Height, length, breadth
   D. None of these

10. Pick up the correct statement from the following?

    A. The incidental expenses of a miscellaneous character which could not be predicted during preparation of the estimate, is called contingencies
    B. Additional supervising staff engaged at work site, is called work charged establishment
    C. Detailed specifications specify qualities, quantities and the proportions of materials to be used for a particular item
    D. All the above