A. 1 in 8’/2
B. 1 in 12
C. 1 in 16
D. 1 in 20
Related Mcqs:
- At points and crossings, the total number of sleepers for 1 in 12 turnouts in Broad Gauge is______________?
A. 51
B. 62
C. 70
D. 78 - The shape of transition curve used by Indian Railways is____________________?
A. cubic parabola
B. spiral
C. sine curve
D. lemniscate of Bernoulli - Minimum composite sleeper index pres-cried on Indian Railways for a track sleeper is_______________?
A. 552
B. 783
C. 1352
D. 1455 - The formation width for a double line Broad Gauge track in cutting (excluding drains) as adopted on Indian Railways is___________________?
A. 6.10 m
B. 8.84 m
C. 10.21m
D. 10.82 m - The formation width for a single line meter gauge track in embankment as adopted on Indian Railways is______________________?
A. 4.27 m
B. 4.88 m
C. 5.49 m
D. 6.10 m - Which of the following mechanical devices is used to ensure that route cannot be changed while the train is on the point even after putting back the signal ?
A. detectors
B. point lock
C. iock bar
D. stretcher bar - A train is hauled by 4-8-2 locomotive. The number of driving wheels in this locomotive is_________________?
A. 4
B. 8
C. 12
D. 14 - A train is hauled by 2-8-2 locomotive with 22.5 tonnes and on each driving axle. Assuming the coefficient of rail-wheel friction to be 0.25, what would be the hauling capacity of the locomotive?
A. 15.0 tonnes
B. 22.5 tonnes
C. 45.0 tonnes
D. 90.0 tonnes - On a single rail track, goods trains loaded with heavy iron material run starting from A to B and then empty wagons run from B to A. The amount of creep in the rails__________________?
A. will be more in the direction of B to A
B. will be more in the direction of A to B
C. will be maximum at the middle of A and B
D. cannot be determined from the given data - Which of the following types of sleepers is preferred on joints ?
A. CST-9 sleeper
B. steel trough sleeper
C. wooden sleeper
D. concrete sleeper
