The pole distance is measured in___________________?

Related Mcqs:

1. A rope is wrapped twice around a rough pole with a coefficient of friction ‘A . It is subjected to a force Fj at one end and a gradually increasing force F2 is applied at the other end till the rope just starts slip-ping. At this instant the ratio of F2 to Fi is_____________________?

   A. 1
   B. e2*
   C. e4*
   D. e*72

2. A quantity measured in the C.G.S system of units has dimensions M”2L3 T3/2. What numerical factor would be required to convert the quantity to SI units ?

   A. 1
   B. 100
   C. 1/100
   D. 1/10000

3. One end of an elastic string of natural length / and modulus X is kept fixed while to the other end is attached a particle of mass m which is hanging freely under gravity. The particle is pulled down vertically through a distance x, held at rest and then released. The motion is___________________?

   A. a simple harmonic motion
   B. a rectilinear motion with constant speed
   C. a damped oscillatory motion
   D. none of the above

4. If the angular distance, 0 = 2t3 – 3t2, the angular acceleration at t = 1 sec. is__________________?

   A. 1 rad/sec2
   B. 4 rad/sec2
   C. 6 rad/sec2
   D. 12 rad/sec2

5. When a circular wheel rolls on a straight track, then the shape of body centrode and space centrode respectively are________________?

   A. straight line and parabola
   B. straight line and circle
   C. circle and straight line
   D. circle and parabola

6. The potential energy of a particle falling through a straight shaft drilled through the earth (assumed homogenous and spherical) is proportional to____________________?

   A. log r
   B. r
   C. r2
   D. 1/r

   where r is the distance of’the particle from centre of the earth

7. The angular speed of a car taking a circular turn of radius 100 m at 36 km/hr will be___________________?

   A. 0.1 rad/sec
   B. 1 rad/sec
   C. 10 rad/sec
   D. 100 rad/sec

8. In a lifting machine a weight of 5 kN is lifted through 200 mm by an effort of 0.1 kN moving through 15 m. The mechanical advantage and velocity ratio of the machine are respectively_____________________?

   A. 50 and 75
   B. 75 and 50
   C. 75 and 75
   D. 50 and 50

9. If a body is lying on a plane whose inclination with the horizontal is less than the angle of friction, then___________________?

   1) a force is required to move the body upwards
   2) a force is required to move the body downward
   3) the body will not be in equilibrium
   The correct answer is?

   A. only (1)
   B. only (2)
   C. both (1) and (2)
   D. both (1) and (3)

10. A symmetrical body is rotating about its axis of symmetry, its moment of inertia about the axis of rotation being 2 kg -m2 and its rate of rotation 2 revolutions/see. The angular momentum of the body in kg-m2/sec is_____________________?

    A. 4
    B. 6 7i
    C. 8TC
    D. 8