A. 2w w l at the fixed end
B. l) at the fixed end
C. w l) at the fixed end
D. 3w l at the fixed end
Related Mcqs:
- d constant, the width of a cantilever of length l of uniform strength loaded with Keeping the depth a uniformly distributed load w varies from zero at the free end and________________?
A. (2w/ × l² at the fixed end
B. (3w/ × l² at the fixed end
C. (3w/ × l² at the fixed end
D. (5w/ × l² at the fixed end - The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope of the arch)___________________?
A. 50/EIc
B. 100/EIc
C. 150/EIc
D. 200/EIc - The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidly EI, is_________________?
A. wl3/3EI
B. wl4/3EI
C. wl4/8EI
D. wl4/12EI - A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 × 106 N/mm2, the deflection of the free end, is________________?
A. 2 mm
B. 3 mm
C. 4 mm
D. 5 mm - A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is________________?
A. L/d
B. L/2d
C. (L/2d)²
D. (L/3d)² - A simply supported beam carries a varying load from zero at one end and w at the other end. If the length of the beam is a, the shear force will be zero at a distance x from least loaded point where x is_________________?
A. a/2
B. a/3
C. a
D. a - A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is_________________?
A. 0.207
B. 0.307
C. 0.407
D. 0.508 - The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is________________?
A. 1/8
B. 1/10
C. 1/12
D. 1/16 - A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2, the depth of the joist, is________________?
A. 200 mm
B. 250 mm
C. 300 mm
D. 400 mm - A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be________________?
A. 2/3
B. 3/2
C. 5/8
D. 8/5
