A. 5%
B. 10 %
C. 15%
D. 20%
Related Mcqs:
- The strength of concrete after one year as compared to 28 days strength is about_______________?
A. 10 to 15% more
B. 15 to 20% more
C. 20 to 25% more
D. 25 to 50% more - The property of fresh concrete, in which the water in the mix tends to rise to the surface while placing and compacting, is called________________?
A. segregation
B. bleeding
C. bulking
D. creep - Minimum grade of concrete to be used in reinforced concrete as per IS:456-1978 is_____________?
A. M15
B. M20
C. M 10
D. M25 - The percentage of voids in cement is approximately_______________?
A. 25%
B. 40%
C. 60%
D. 80% - Strength of concrete increases with________________?
A. increase in water-cement ratio
B. increase in fineness of cement
C. decrease in curing time
D. decrease in size of aggregate - The relation between modulus of rupturefcr and characteristic strength of concrete fck is given by_______________?
A. fcr=0.35Vf7
B. fcr=0.57f7
C. fcr=0.7Vf7
D. fcr=1.2Vf7
where fcr and fck are in N/mm2′ - According to IS : 456-1978, the fiexural strength of concrete is________________?
A. directly proportional to compressive strength
B. inversely proportional to compressive strength
C. directly proportional to square root of compressive strength
D. inversely proportional to square root of compressive strength - If nominal shear stress tv exceeds the design shear strength of concrete xc, the nominal shear reinforcement as per IS : 456-1978 shall be provided for carrying a shear stress equal to__________________?
A. xv
B. xc
C. xv – TC
D. Tv + Tc - Cube strength of controlled concrete to be used for pretensioned and post-tensioned work respectively should not be less than__________________?
A. 35 MPa and 42 MPa
B. 42 MPa and 35 MPa
C. 42 MPa and 53 MPa
D. 53 MPa and 42 MPa - The approximate value of the ratio between direct tensile strength and flexural strength is_____________?
A. 0.33
B. 0.5
C. 0.75
D. 1.0
