A. 0.33
B. 0.5
C. 0.75
D. 1.0
Related Mcqs:
- The relation between modulus of rupture fcr, splitting strength fcs and direct tensile strength fcl is given by_______________?
A. tcr – rcs = tct
B. fcr>fcs>fc
C. fcr<fcs
D. fc5>fcr>fC - Which of the following has high tensile strength ?
A. plain hot rolled wires
B. cold drawn wires
C. heat treated rolled wires
D. all have same tensile strength - The permissible diagonal tensile stress in reinforced brick work is_____________?
A. about 0.1 N/mm2
B. zero
C. 0.3 N/mm2 to 0.7 N/mm2
D. about 1.0 N/mm2 - Approximate value of shrinkage strain in concrete, is________________?
A. 0.003
B. 0.0003
C. 0.00003
D. 0.03 - The strength of concrete after one year as compared to 28 days strength is about_______________?
A. 10 to 15% more
B. 15 to 20% more
C. 20 to 25% more
D. 25 to 50% more - If the storey height is equal to length of RCC wall, the percentage increase in strength is_____________?
A. 0
B. 10
C. 20
D. 30 - Ratio of permissible stress in direct compression and bending compression is______________?
A. less than 1
B. between 1 and 1.5
C. between 1.5 and 2.0
D. greater than 2 - The slab is designed as one way if the ratio of long span to short span is_____________?
A. less than 1
B. between 1 and 1.5
C. between 1.5 and 2
D. greater than 2 - Stress strain curve of high tensile steel_______________?
A. has a definite yield point
B. does not show definite yield point but yield point is defined by 0.1% proof stress
C. does not show definite yield point but yield point is defined by 0.2% proof stress
D. does not show definite yield point but yield point is defined by 2% proof stress - The individual variation between test strength of sample should not be more than______________?
A. ±5% of average
B. ± 10% of average
C. ± 15% of average
D. ±20% of average
