A. hard
B. tough
C. heavy
D. light
Related Mcqs:
- Study the following statements. (1) Hydraulic lime is suitable for white washing, (2) Fat lime is suitable for whitewashing, (3) Hydraulic lime is suitable for making mortar, (4) Fat lime is suitable for making mortar. The correct answer is______________?
A. (1) and (4)
B. (2) and (3)
C. (1) and (2)
D. (3) and (4) - The pressure acting on the stones in stone masonry construction should be_____________?
A. along the direction of bedding planes
B. at 45° to the direction of bedding planes
C. at 60° to the direction of bedding planes
D. perpendicular to the direction of bedding planes - The frog of the brick in a brick masonry is generally kept on______________?
A. bottom face
B. top face
C. shorter side
D. longer side - Number of bricks required for one cubic metre of brick masonry is____________?
A. 400
B. 450
C. 500
D. 550 - In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as_______________?
A. English bond
B. double flemish bond
C. zigzag bond
D. single flemish bond - The stretcher bond in brick masonry can be used only when the thickness of wall is_____________?
A. 90 mm
B. 180 mm
C. 190 mm
D. 280 mm - The type of bond provided in brick masonry for carrying heavy loads is___________?
A. single flemish bond
B. double flemish bond
C. English bond
D. zigzag bond - Expansion Joints in masonry walls are provided in wall lengths usater than_______________?
A. 10 m
B. 20 m
C. 30 m
D. 40 m - A mortar joint in masonry which is normal to the face of wall is known as_________________?
A. bed joint
B. wall joint
C. cross joint
D. bonded joint - The slenderness ratio for masonry walls should not be more than_____________?
A. 10
B. 20
C. 30
D. 40
