A. remains the same
B. is decreased
C. is increased
D. none of the above
Related Mcqs:
- If the reverse bias on the gate of a JFET is increased, then width of the conducting channel ______________?
A. is decreased
B. is increased
C. remains the same
D. none of the above - The gate of a JFET is ___________ biased?
A. reverse
B. forward
C. reverse as well as forward
D. none of the above - The gate voltage in a JFET at which drain current becomes zero is called ______________ voltage?
A. saturation
B. pinch-off
C. active
D. cut-off - A JFET is similar in operation to ___________ valve?
A. diode
B. pentode
C. triode
D. tetrode - A JFET is also called____________ transistor?
A. unipolar
B. bipolar
C. unijunction
D. none of the above - In a JFET, when drain voltage is equal to pinch-off voltage, the depletion layers ______________?
A. almost touch each other
B. have large gap
C. have moderate gap
D. none of the above - In a p-channel JFET, the charge carriers are _____________?
A. electrons
B. holes
C. both electrons and holes
D. none of the above - A MOSFET is sometimes called______________ JFET?
A. many gate
B. open gate
C. insulated gate
D. shorted gate - A certain common-source JFET has a voltage gain of 10. If the source bypass capacitor is removed, ______________?
A. the voltage gain will increase
B. the transconductance will increase
C. the voltage gain will decrease
D. the Q-point will shift - In a certain CS JFET amplifier, RD= 1kO , RS= 560 O , VDD=10V and gm= 4500 µS. If the source resistor is completely bypassed, the voltage gain is ________________?
A. 450
B. 45
C. 2.52
D. 4.5