A. earthing connection
B. bedding
C. armouring
D. none of the above
Related Mcqs:
- The metallic sheath may be made of lead or lead alloy or of aluminium ?
A. Yes
B. No - A certain cable has an insulation of relative permittivity 4. If the insulation is replaced by one of relative permittivity 2, the capacitance of the cable will become_____________?
A. one half
B. double
C. four times
D. none of the above - If a power cable and a communication cable are to run parallel the minimum distance between the two, to avoid interference, should be______________?
A. 2 cm
B. 10 cm
C. 50 cm
D. 400 cm - The thickness of metallic shielding on cables is usually_______________?
A. 0.04 mm
B. 0.2 to 0.4 mm
E. 3 to 5 mm
D. 40 to 60 mm - The bedding on a cable consists of____________?
A. hessian cloth
B. jute
C. any of the above
D. none of the above - In case of three core flexible cable the colour of the neutral is_________?
A. blue
B. black
C. brown
D. none of the above - In a cable, the maximum stress under operating conditions is at___________?
A. insulation layer
B. sheath
C. armour
D. conductor surface - The material for armouring on cable is usually__________?
A. steel tape
B. galvanised steel wire
C. any of the above
D. none of the above - If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be_______________?
A. 5 kV/mm
B. 10 kV/mm
A. 15 kV/mm
D. 30 kV/mm - Capacitance grading of cable implies__________?
A. use of dielectrics of different permeabilities
B. grading according to capacitance of cables per km length
C. cables using single dielectric in different concentrations
D. capacitance required to be introduced at different lengths to counter the effect of inductance
E. none of the above
