A. equivalent current source and impedance in parallel
B. equivalent current source and impedance in series
C. equivalent impedance
D. equivalent current source
Updated by: Attaullah
Related Mcqs:
- While calculating Rth in Thevenin’s theorem and Norton equivalent
A. all independent sources are made dead
B. only current sources are made dead
C. only voltage sources are made dead
D. all voltage and current sources are made dead - The superposition theorem is applicable to____________?
A. linear, non-linear and time variant responses
B. linear and non-linear resistors only
C. linear responses only
D. none of the above - The concept on which Superposition theorem is based on_____________?
A. reciprocity
B. duality
C. non-linearity
D. linearity - In Thevenin’s theorem, to find Z
A. all independent current sources are short circuited and independent voltage sources are open circuited
B. all independent voltage sources are open circuited and all independent current sources are short circuited
C. all independent voltage and current sources are short circuited
D. all independent voltage sources are short circuited and all independent current sources are open circuited - The superposition theorem requires as many circuits to be solved as there are____________?
A. sources, nodes and meshes
B. sources and nodes
C. sources
D. nodes - Millman’s theorem yields____________?
A. equivalent resistance
B. equivalent impedance
C. equivalent voltage source
D. equivalent voltage or current source - Superposition theorem can be applied only to circuits having____________?
A. resistive elements
B. passive elements
C. non-linear elements
D. linear bilateral elements - The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as___________?
A. non-linear circuit
B. linear circuit
C. bilateral circuit
D. none of the above - Which of the following is non-linear circuit parameter?
A. Inductance
B. Condenser
C. Wire wound resistor
D. Transistor - A star circuit has element of resistance R/2. The equivalent delta elements will be_____________?
A. R/6
B. fi?
C. 2R
D. 4R
2 Comments
Dear sir on many places the B is given as correct answer but in Norton Theorem Resistance is parallel with current source so A should be the correct answer.
at one place i found it i.e. ELECTRICAL CIRCUIT ANALYSIS
Thanks dear Attaullah for Correction. Answer updated