A. running winding only
B. starting winding only
C. either A. or (b)
D. both A. and (b)
Related Mcqs:
- The direction of rotation of universal motor can be reversed the by reversing the flow of current through__________?
A. armature winding
B. field winding
C. either armature winding or field winding
D. none of the above - In case of a shaded pole motor the direction of rotation of the motor is__________?
A. from main pole to shaded pole
B. from shaded pole to main pole
C. either of the above depending on voltage
D. either of the above depending on power factor - In repulsion motor direction of rotation of motor____________?
A. is opposite to that of brush shift
B. is the same as that of brush shift
C. is independent of brush shift - The direction of rotation of an hysteresis motor is determined by____________?
A. interchanging the supply leads
B. position of shaded pole with respect to main pole
C. retentivity of the rotor material
D. none of these - To reverse the direction of rotation of acapacitor start motor while it is running we should___________?
A. disconnect motor from the supply till it stops then reconnect it to supply with reversed connection of main or auxiliary winding
B. disconnect motor from supply and immediately reconnect it to supply with reversed connections of the main winding
C. reverse the direction of connection of the auxiliary winding and after motor comes to rest then connect auxiliary winding to the supply
D. reverse the direction of connections of the auxiliary winding and immediately connect it to supply - In a split phase motor, the running winding should have?
A. high resistance and low inductance
B. low resistance and high inductance
C. high resistance as well as high inductance
D. low resistance as well as low inductiance - In split-phase motor auxiliary winding is of___________?
A. thick wire placed at the bottom of the slots
B. thick wire placed at the top of the slots
C. thin wire placed at the top of the slots
D. thin wire placed at the bottom of the slots - In split phase motor main winding is of _____________?
A. thin wire placed at the top of the slots
B. thin wire placed at the bottom of the slots
C. thick wire placed at the bottom of the slots
D. thick wire placed at the top of the” slots - In a split phase motor____________?
A. the starting winding is connected through a centrifugal switch
B. the running winding is connected through a centrifugal switch
C. both starting and running windings are connected through a centrifugal switch
D. centrifugal switch is used to control supply voltage - A hysteresis motor works on the principle of__________?
A. hysteresis loss
B. magnetisation of rotor
C. eddy current loss
D. electromagnetic induction
