A. the magnetising current of the rotor will decrease
B. the power factor will decrease
C. speed of motor will increase
D. the windage losses will increase
Related Mcqs:
- In case the air gap in an induction motor is increased____________?
A. the magnetising current of the rotor will decrease
B. the power factor will decrease
C. speed of motor will increase
D. the windage losses will increase - The good power factor of an induction motor can be achieved if the average flux density in the air gap is___________?
A. absent
B. small
C. large
D. infinity - In an induction motor if air-gap is increased__________?
A. the power factor will be low
B. windage losses will be more
C. bearing friction will reduce
D. copper loss will reduce In an induction motor - The stating torque of the slip ring induction motor can be increased by adding__________?
A. external inductance to the rotor
B. external resistance to the rotor
C. external capacitance to the rotor
D. both resistance and inductance to rotor - The starting torque of a three phase induction motor can be increased by__________?
A. increasing slip
B. increasing current
C. both A. and (b)
D. none of the above - Slip ring motor is preferred over squirrel cage induction motor where___________?
A. high starting torque is required
B. load torque is heavy
C. heavy pull out torque is required
D. all of the above - In case of a double cage induction motor, the inner cage has__________?
A. high inductance arid low resistance
B. low inductance and high resistance
C. low inductance and low resistance
D. high inductance and high resistance - An induction motor with 1000 r.p.m. speed will have____________?
A. 8 poles
B. 6 poles
C. 4 poles
D. 2 poles - The torque developed in the cage induction motor with autostarter is___________?
A. k/torque with direct switching
B. K x torque with direct switching
C. K2 x torque with direct switching
D. k2/torque with direct switching - Insertion of resistance in the rotor of an induction motor to develop a given torque?
A. decreases the rotor current
B. increases the rotor current
C. rotor current becomes zero
D. rotor current rernains same