A. Dummy coils
B. Commutator
C. Eye bolt
D. Equilizer rings
Related Mcqs:
- Two generators A and B have 6-poles each. Generator A has wave wound armature while generator B has lap wound armature. The ratio of the induced e.m.f. is generator A and B will be_______________?
A. 2 : 3
B. 3 : 1
C. 3 : 2
D. 1 : 3 - The e.m.f. generated by a shunt wound D.C. generator isE. Now while pole flux remains constant, if the speed of the generator is doubled, the e.m.f. generated will be_______________?
A. E/2
B. 2E
C. slightly less than E
D. E - The purpose of providing dummy coils in a generator is____________?
A. to reduce eddy current losses
B. to enhance flux density
C. to amplify voltage
D. to provide mechanical balance for the rotor - The purpose of providing dummy coils in a generator is__________________?
A. to reduce eddy current losses
B. to enhance flux density
C. to amplify voltage
D. to provide mechanical balance for the rotor - The terminal voltage of a series generator is 150 V when the load current is 5 A. If the load current is increased to 10 A, the terminal voltage will be____________?
A. 150 V
B. less than 150 V
C. greater than 150 V
D. none of the above - In a D.C. generator the ripples in the direct e.m.f. generated are reduced by_____________?
A. using conductor of annealed copper
B. using commutator with large number of segments
C. using carbon brushes of superior quality
D. using equiliser rings - The e.m.f. induced in the armature of a shunt generator is 600 V. The armature resistance is 0.1 ohm. If the armature current is 200 A, the terminal voltage will be_____________?
A. 640 V
B. 620 V
C. 600 V
D. 580 V - Which of the following generator will have negligible terminal voltage while running on no-load?
A. Series generator
B. Shunt generator
C. Compound generator
D. Separately excited generator - Following D.C. generator will be in a position to build up without any residual magnetism in the poles______________?
A. series generator
B. shunt generator
C. compound generator
D. self-excited generator - The terminal voltage of a D.C. shunt generator drops on load because of all of the following reasons except:_____________?
A. armature reaction
B. armature resistance drop
C. field weakening due to armature reaction and armature
D. commutation