A. 18 Q
B. 36 Q
C. 48 Q
D. 64 Q
Related Mcqs:
- A current of 16 amperes divides between two branches in parallel of resistances 8 ohms and 12 ohms respectively. The current in each branch is_____________?
A. 6.4 A, 6.9 A
B. 6.4 A, 9.6 A
C. 4.6 A, 6.9 A
D. 4.6 A, 9.6 A - Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be_____________?
A. 160 ohms
B. 80 ohms
C. 20 ohms
D. 10 ohms - A resistance having rating 10 ohms, 10 W is likely to be a__________?
A. metallic resistor
B. carbon resistor
C. wire wound resistor
D. variable resistor - Four wires of same material, the same cross-sectional area and the same length when connected in parallel give a resistance of 25 Q. If the same four wires are connected is series the effective resistance will be________?
A. 100 Ω
B. 200 Ω
C. 300 Ω
D. 400 Ω - Which of the following statement is true both for a series and a parallel D. C. circuit?
A. Elements have individual currents
B. Currents are additive
C. Voltages are additive
D. Power are additive - If a parallel circuit is opened in the main line, the current_______________?
A. increases in the branch of the lowest resistance
B. increases in each branch
C. is zero in all branches
D. is zero in the highest resistive branch - When one leg of parallel circuit is opened out the total current will______________?
A. reduce
B. increase
C. decrease
D. become zero - Three identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be_________________?
A. 9 times
B. 1/9 times
C. 1/3 times
D. 3 times - If 1 A current flows in a circuit, the number of electrons flowing through this circuit is
A. 0.625 × 1019
B. 1.6 × 1019
C. 1.6 × 10-19
D. 0.625 × 10-19 - When a voltage of one volt is applied, a circuit allows one micro ampere current to flow through it. The conductance of the circuit is___________?
A. 1 n-mho
B. 106 mho
C. 1 milli-mho
D. none of the above