A. 40 W
B. 90W
C. 100W
D. 120W
Advertisement
Related Mcqs:
- n an LCR series circuit, if V is the effective value of the applied voltage VR is the voltage across R VL is the effective voltage across L & Vc is the effective voltage across C then_______________?
IA. V = VR+VL+VC
B. V2 = VR2+VL2+VC2
C. V2 = VR2+(VL-VC)2
D. V2 = VL2+(VR-VC)2 - Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains ?
A. 40 W bulb
B. 60 W blub
C. 100 W blub
D. all will burn equally brightly - A voltage V = V0 cos ωt is applied across a resistor of resistance R the average power dissipated per cycle in the resistor is given by___________?
A. V√/√2R
B. V/√2√R
C. V02/√2R
D. 2/√2√R - When a pure inductor of inductance L and a pure capacitor of capacitance C are connected in parallel to a sinusoidal potential difference V the potential difference across both L & C will be_______________?
A. Same
B. Different
C. At L will be more than at C
D. At L will be less than at C - All electrical appliances are connected in parallel to each other between the main line and neutral wire to get ______________________?
A. same current
B. same current and potential difference
C. different current but same potential difference
D. different current and potential differences - A 10Ω electric heater is connected to a 220V 50Hz mains supply. What is the peak value of the potential difference across the heater element ?
A. 220V
B. 220/ 2V
C. 110V
D. 220 √2V - A 100µF capacitor with a 12V source in series having frequency 50Hz will offer a capacitive reactance of about______________?
A. 32Ω
B. 62Ω
C. 50Ω
D. 100Ω - The average power and instantaneous power become equal if work is done at __________________?
A. any rate
B. at variable rate
C. at uniform rate
D. at high rate - At resonance the value of the power factor in an L-C-R series circuit is_______________?
A. Zero
B. 2
C. 1
D. Not definite - The resultant of two forces of equal magnitudes is also equal to the magnitude of the forces. The angle between the two forces is________________?
A. 30°
B. 60°
C. 90°
D. 120°
Advertisement