A. Quantity & temperature of waste gas
B. Dust concentration & nature of dust in waste gas
C. Corrosive nature of the waste gas
D. All A., B. and C.
Related Mcqs:
- Which of the following is not a continuous waste heat recovery equipment from the flue gases going out of furnace ?
A. Economiser
B. Regenerator
C. Ceramic recuperator
D. Waste heat boiler - In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the__________________?
A. Rate of firing and emissivity of flame
B. Thermal conductivity of the charge & structural materials of furnace
C. Nature of process; whether batch, continuous or intermittent
D. All A., B. and C. - The rate of scaling of furnace stock depends upon the_________________?
A. Temperature
B. Time
C. Nature of atmosphere
D. All A., B. and C. - Regenerators are used for waste heat recovery in____________________?
A. By-product coke ovens
B. Beehive coke oven
C. Blast furnace stoves
D. Soaking pits - Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above _____________ °C, because corrosion prevails at higher temperatures?
A. 350
B. 750
C. 1050
D. 1250 - Circulation of gases in furnace is caused by the_________________?
A. Change in volume during a change of temperature
B. Difference in density between hot and cold gases
C. Furnace pressure in conjunction with draft in flues
D. All A., B. and C. - Waste heat from the outgoing flue gases in a thermal power plant is recovered by a/an_________________?
A. Economiser
B. Steam superheater
C. Air preheater
D. All A., B. and C. - The heating capacity of muffle furnace depends on the_________________?
A. Surface area & emissivity of the stock
B. Properties of the muffle wall (temperature, area, and emissivity)
C. Both A. & B.
D. Neither A. nor B. - Which furnace employs an I.D. fan for the removal of flue gases from the furnace ?
A. Coke oven
B. Blast furnace stoves
C. Beehive coke oven
D. High pressure boiler - Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percent furnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C ?
A. 5
B. 60
C. 20
D. 40
