A. CO2
B. CO
C. O2
D. C
Related Mcqs:
- Incomplete combustion of a fuel is characterised by the high _______________ in the flue gas?
A. Smoke
B. Temperature
C. Oxygen
D. Carbon monoxide - Incomplete combustion of fuel in the furnace is judged by high _____________ of the flue gases?
A. CO content
B. Dew point
C. CO2 content
D. O2 content - A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the_________________?
A. Presence of large quantity of hydrogen in the fuel
B. Low calorific value of the fuel
C. High sulphur content in the fuel
D. Lack of thorough mixing of fuel with air - Flue gas obtained on complete combustion of pure acetylene (a hydrocarbon fuel) will contain __________________?
A. CO
B. CO2
C. H2O
D. Both B. & C. - Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around ______________ percent?
A. 4
B. 96
C. 20
D. 40 - Efficiency of the combustion of a fuel is judged by the ______________ the flue gas?
A. % of CO2 in
B. % of O2in
C. Temperature of
D. Colour of - Explosion limit of blast furnace gas is 37 to 71% gas in gas-air mixture. It means that the blast furnace gas will explode when burnt in a confined space, if its concentration in the gas-air mixture is _______________ percent?
A. 71%
C. In between 37 & 71%
D. None of these - In flue gas analysis by Orsat’s apparatus, carbon monoxide is absorbed by__________________?
A. Cuprous chloride
B. Potassium hydroxide
C. Alkaline pyrogallol solution
D. None of these - Pure carbon is completely burnt in oxygen. The flue gas analysis is 70%CO2, 20%CO and 10%O2. The percent excess oxygen used is __________________?
A. 20
B. 12.5
C. 0
D. 10 - The sequence of absorption in flue gas analysis by Orsat’s apparatus is respectively_______________________?
A. CO2, O2, CO
B. CO, O2, CO2
C. CO2, CO, O2
D. O2, CO2, CO
