A. That present in volatile matters
B. The total quantity of carbon present in the coal
C. Hundred minus the percentage of volatile matter, ash and moisture
D. The one which is present in the residue after combustion
Related Mcqs:
- A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon _________________?
A. Is less liable to spontaneous combustion on storage
B. Is more difficult to ignite and produces a shorter flame
C. Requires smaller combustion space and less secondary air
D. None of these - The difference between total carbon and fixed carbon of coal will be minimum in case of___________________?
A. Lignite
B. Bituminous coal
C. Anthracite
D. High temperature coke (V.M < 0.5%) - Calorific value of coal middling generated in coal washeries during washing of coal may be around _____________ Kcal/kg?
A. 1000
B. 4000
C. 6000
D. 8000 - The ratio of % total carbon obtained in the ultimate analysis of coke and % fixed carbon obtained in the proximate analysis is always ___________________?
A. 1
B. < 1
C. > 1
D. Unpredictable - A fuel containing carbon and carbon monoxide (but containing no hydrogen or its compounds) is burnt in pure oxygen at constant pressure. Its gross calorific value as compared to net calorific value will be_________________?
A. More
B. Less
C. Same
D. Data insufficient; can’t be predicted - Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an ______________ bed gasifier?
A. Entrained
B. Moving
C. Fixed
D. Fluidised - (64-132) rank coal (ASTM) means a coal with 64%___________________?
A. Fixed carbon and having a heat value of 13, 200 BTU/1b
B. Ash and a heating value of 13, 200 BTU/1b
C. Fixed carbon and a heating value of 132 BTU/1b
D. None of these - 64-132) rank coal (ASTM) means a coal with 64%___________________?
A. Fixed carbon and having a heating value around 13, 200 BTU/1b
B. Ash and heating value around 13, 200 BTU/1b
C. Fixed carbon and heating value around 132 BTU/1b
D. None of these - Prime coking coal is always blended with medium or non- coking coal before carbonisation__________________?
A. To check against its excessive swelling during heating, which may exert high pressure and
damage coke oven walls
B. Because, it alone produces unreactive coke
C. Both A. and B.
D. Neither A. nor B. - The liquid used for the washing of coal in an industrial coal washery is a mixture of water and ____________________?
A. Carbon tetrachloride
B. Sand (40%)
C. Mineral oil of high viscosity & specific gravity (1.6)
D. None of these