A. both ends hinged
B. both ends fixed
C. one end fixed and other end hinged
D. one end fixed and other end free
Related Mcqs:
- In a pile of length /, the points of suspension from ends for lifting it are located at______________?
A. 0.207 1
B. 0.25 /
C. 0.293 /
D. 0.333 / - During erection, the pile of length / is supported by a crane at a distance of________________?
A. 0.207 /
B. 0.293 /
C. 0.7071
D. 0.793 /from the driving end of pile which rests on the ground
- The load carrying capacity of a helically reinforced column as compared to that of a tied column is about________________?
A. 5% less
B. 10% less
C. 5% more
D. 10% more - According to IS : 456- 1978, minimum slenderness ratio for a short column is_______________?
A. less than 12
B. less than 18
C. between 18 and 24
D. more than 24 - According to IS: 456-1978, the maximum reinforcement in a column is_____________?
A. 2 %
B. 4%
C. 6 %
D. 8 % - Minimum pitch of transverse reinforcement in a column is________________?
A. the least lateral dimension of the member
B. sixteen times the smallest diameter of longitudinal reinforcement bar to be tied
C. forty-eight times the diameter of transverse reinforcement
D. lesser of the above three values - If the size of panel in a flat slab is 6m x 6m, then as per Indian Standard Code, the widths of column strip and middle strip are__________________?
A. 3.0 m and 1.5 m
B. 1.5 m and 3.0 m
C. 3.0 m and 3.0 m
D. 1.5 m and 1.5 m - The limits of percentage p of the longitudinal reinforce-ment in a column is given by_____________?
A. 0.15% to 2%
B. 0.8% to 4%
C. 0.8% to 6%
D. 0.8% to 8% - The minimum diameter of longitudinal bars in a column is________________?
A. 6 mm
B. 8 mm
C. 12 mm
D. 16 mm - The depth of footing for an isolated column is governed by______________?
1. maximum bending moment
2. shear force
3. punching shear
The correct answer is?A. only (1)
B. (1) and (2)
C. (1) and (3)
D. (1), (2) and (3)
