A. less
B. more
C. equal
D. equal or more
Related Mcqs:
- Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to_________________?
A. 1/2
B. 1
C. 2
D. 1/4 - The stretcher bond in brick masonry can be used only when the thickness of wall is_____________?
A. 90 mm
B. 180 mm
C. 190 mm
D. 280 mm - The most important tool in brick laying for lifting and spreading mortar and for forming joints is____________?
A. trowel
B. square
C. bolster
D. scutch - Expansion Joints in masonry walls are provided in wall lengths usater than_______________?
A. 10 m
B. 20 m
C. 30 m
D. 40 m - The pressure acting on the stones in stone masonry construction should be_____________?
A. along the direction of bedding planes
B. at 45° to the direction of bedding planes
C. at 60° to the direction of bedding planes
D. perpendicular to the direction of bedding planes - In any good staircase, the maximum and minimum pitch respectively should be_____________?
A. 90° and 0°
B. 75° and 30°
C. 60° and 10°
D. 40° and 25° - The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is______________?
A. less than 1
B. equal to 1
C. greater than 1
D. less than 1 in beams but greater than 1 in channels - Minimum thickness of wall where single flemish bond can be used is_____________?
A. half brick thick
B. one brick thick
C. one and a half bricks thick
D. two bricks thick - As compared to English bond, double flemish bond is_________________?
A. stronger
B. more compact
C. costly
D. none of the above - Compared to mild steel, cast iron has (1) high compressive strength (2) high tensile strength (3) low compressive strength (4) low tensile strength The correct answer is_________________?
A. (1) and (2)
B. (2) and (3)
C. (3) and (4)
D. (1)and(4)
