A. 10 m
B. 20 m
C. 30 m
D. 40 m
Related Mcqs:
- Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to_________________?
A. 1/2
B. 1
C. 2
D. 1/4 - The slenderness ratio for masonry walls should not be more than_____________?
A. 10
B. 20
C. 30
D. 40 - The stretcher bond in brick masonry can be used only when the thickness of wall is_____________?
A. 90 mm
B. 180 mm
C. 190 mm
D. 280 mm - A mortar joint in masonry which is normal to the face of wall is known as_________________?
A. bed joint
B. wall joint
C. cross joint
D. bonded joint - The type of bond provided in brick masonry for carrying heavy loads is___________?
A. single flemish bond
B. double flemish bond
C. English bond
D. zigzag bond - The stone suitable for rubble masonry should be____________?
A. hard
B. tough
C. heavy
D. light - The frog of the brick in a brick masonry is generally kept on______________?
A. bottom face
B. top face
C. shorter side
D. longer side - Number of bricks required for one cubic metre of brick masonry is____________?
A. 400
B. 450
C. 500
D. 550 - In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as_______________?
A. English bond
B. double flemish bond
C. zigzag bond
D. single flemish bond - The pressure acting on the stones in stone masonry construction should be_____________?
A. along the direction of bedding planes
B. at 45° to the direction of bedding planes
C. at 60° to the direction of bedding planes
D. perpendicular to the direction of bedding planes
