A. ordinary Portland cement
B. low heat cement
C. rapid hardening cement
D. sulphate resisting cement
Related Mcqs:
- Which of the following cements is suitable for use in massive concrete structures such as large dams ?
A. ordinary Portland cement
B. low heat cement
C. rapid hardening cement
D. sulphate resisting cement - The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is_______________?
A. 1
B. 2
C. 3
D. 4 - Percentage of silica in a good brick earth lies between_______________?
A. 5 to 10%
B. 20 to 30%
C. 50 to 60%
D. 70 to 80% - The percentage of alumina in a good brick earth lies between________________?
A. 5 to 10%
B. 20 to 30%
C. 50 to 60%
D. 70 to 80% - Percentage of carbon content in mild steel is_______________?
A. less than 0.25
B. between 0.25 and 0.7
C. between 0.7 and 1.5
D. greater than 1.5 - In which of the following directions, the strength of timber is maximum ?
A. parallel to grains
B. 45° to grains
C. perpendicular to grains
D. same in all directions - Which of the following gradients exerts maximum influence on properties of steel?
A. iron
B. carbon
C. manganese
D. sulphur - Couple close roof is suitable for maximum span of________________?
A. 2.5 m
B. 3.5 m
C. 4.5 m
D. 5.5 m - Couple close roof is suitable for maximum span of______________?
A. 2.5 m
B. 3.5 m
C. 4.5 m
D. 5.5 m - In any good staircase, the maximum and minimum pitch respectively should be_____________?
A. 90° and 0°
B. 75° and 30°
C. 60° and 10°
D. 40° and 25°