Number of bricks required for one cubic metre of brick masonry is____________?

Related Mcqs:

1. The frog of the brick in a brick masonry is generally kept on______________?

   A. bottom face
   B. top face
   C. shorter side
   D. longer side

2. In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as_______________?

   A. English bond
   B. double flemish bond
   C. zigzag bond
   D. single flemish bond

3. The stretcher bond in brick masonry can be used only when the thickness of wall is_____________?

   A. 90 mm
   B. 180 mm
   C. 190 mm
   D. 280 mm

4. The type of bond provided in brick masonry for carrying heavy loads is___________?

   A. single flemish bond
   B. double flemish bond
   C. English bond
   D. zigzag bond

5. Which of the following ingredients of the brick earth enables the brick to retain its shape ?

   A. alumina
   B. silica
   C. iron
   D. magnesia

6. The most important tool in brick laying for lifting and spreading mortar and for forming joints is____________?

   A. trowel
   B. square
   C. bolster
   D. scutch

7. The stone suitable for rubble masonry should be____________?

   A. hard
   B. tough
   C. heavy
   D. light

8. The pressure acting on the stones in stone masonry construction should be_____________?

   A. along the direction of bedding planes
   B. at 45° to the direction of bedding planes
   C. at 60° to the direction of bedding planes
   D. perpendicular to the direction of bedding planes

9. Expansion Joints in masonry walls are provided in wall lengths usater than_______________?

   A. 10 m
   B. 20 m
   C. 30 m
   D. 40 m

10. The slenderness ratio for masonry walls should not be more than_____________?

    A. 10
    B. 20
    C. 30
    D. 40